OVO GUIDES · CARE MODE
A reliable care routine has three stages: clean, dry, and store. This guide explains how to care for TPE and silicone torso sex dolls, hip & butt products, and pocket pussies without assuming that every product can be washed, reversed, heated, or stored in the same way.
QUICK START
How Do You Clean and Store TPE and Silicone Intimate Products?
Clean
Use the cleaning method and products approved for the exact material and construction.
Dry
Remove exterior and internal moisture completely without using damaging heat.
Store
Keep the product separately in a clean, cool, dry place away from sunlight and pressure.
- Confirm the material and care instructions.
- Separate removable parts only when the manual allows it.
- Rinse or wipe as directed.
- Apply a compatible cleaner gently.
- Rinse away residue as directed.
- Dry every permitted area completely.
- Store the product separately and without compression.
PRE-GAME CHECK
Before Cleaning: Identify the Product
Start with the product page, packaging, or manual. Confirm whether the product is made from TPE, silicone, or more than one material. Then check whether it contains removable sleeves, electronics, heating components, charging ports, hard internal structures, or areas that must not be submerged.
Material
TPE, silicone, or a stated combination.
Construction
Fixed or removable components; reversible only if approved.
Water exposure
Fully washable, rinse-only, wipe-only, or protected-port instructions.
Compatible care
Approved cleaner, lubricant, powder, drying, and storage method.
Do not guess. Similar-looking products can require different care. If the instructions are missing, contact OVODOLL support with the product name before cleaning.
CLEAN MODE
Step 1: Clean the Product
Prepare a clean workspace
Wash your hands and clear a stable surface. Keep sharp jewelry, rough towels, harsh chemicals, and strongly dyed fabric away from soft materials. If the product is heavy, support it before moving or rotating it.
Use only compatible cleaning products
Follow the product manual when choosing water temperature and cleaner. Apply a small amount gently and clean all permitted contact surfaces without aggressive scrubbing, stretching, or pulling. Do not immerse electrical parts or charging ports unless the product is specifically rated and instructed for immersion.
Rinse or wipe away residue
Cleaner left on a product can affect its surface or remain inside internal areas. Rinse with the amount of water allowed by the manual, or wipe repeatedly with a clean damp cloth when the product is wipe-only.
EXPLORE CLEANERS & CAREDRY MODE
Step 2: Dry Every Area Completely
Drying is not an optional finishing touch. Moisture sealed inside a sleeve, fold, pouch, or case can create odor and hygiene problems. Pat the exterior gently with a clean, soft, lint-free cloth. Avoid twisting, wringing, or rubbing flexible material.
Check internal areas
Use only the drying method recommended for the product. Removable components may be dried separately when the manual permits removal. Fixed internal channels may require additional air-drying time or a compatible drying accessory.
Avoid damaging heat
Do not use a hair dryer, radiator, heater, direct sunlight, or another high-temperature source unless the manufacturer explicitly specifies a safe method and temperature. A product that supports controlled warming during use is not automatically designed for heat-assisted drying.
Before storage: inspect the exterior, openings, folds, seams, removable parts, and storage pouch. Everything should be clean and fully dry.
STORE MODE
Step 3: Store It Safely and Discreetly
- Store the product clean and completely dry.
- Use a dedicated pouch, compartment, or appropriately sized case.
- Keep different materials separate unless their instructions confirm direct contact is safe.
- Avoid direct sunlight, high heat, moisture, dust, pets, and sharp objects.
- Do not compress soft products under heavy objects.
- Keep charging cables, caps, and compatible accessories together without pressing them into the product.
- Remove batteries before long-term storage when the manual instructs you to do so.
FORMAT SELECT
Care Tips by Product Format
Torso Sex Dolls
Check the listed weight before moving the product. Support the torso on a stable surface and avoid pulling soft areas while rotating it. Because of the larger surface area, allow more time for cleaning, inspection, and drying. Store it supported without sharp pressure points.
View torso sex dolls →Hip & Butt Products
Pay attention to folds, contours, seams, and any area where moisture can remain. Support the base during cleaning and drying. Choose a storage space wide enough to prevent compression, and do not leave heavy accessories pressing into the surface.
View hip & butt products →Pocket Pussies
Compact size can simplify handling, but internal drying remains essential. Remove or reverse a sleeve only when the instructions allow it. Store the clean, dry product in its own pouch or compartment and keep caps or cases ventilated as directed.
View pocket pussies →MATERIAL CHECK
TPE vs Silicone Care
TPE Products
- Use only TPE-compatible cleaner and lubricant.
- Avoid unnecessary stretching, friction, and hard pressure.
- Follow the model-specific instructions for powdering or surface care.
- Keep away from staining fabrics and unverified materials.
- Store separately when compatibility is unknown.
Silicone Products
- Use only silicone-compatible cleaner and lubricant.
- Check instructions before exposing seams, ports, or electronics to water.
- Avoid sharp objects and abrasive scrubbing.
- Do not assume every silicone formulation has the same firmness or care needs.
- Store clean, dry, and separately when compatibility is unknown.
GAME OVER
Eight Care Mistakes to Avoid
Using an incompatible cleaner
Strong or unverified chemicals may affect the material or finish.
Storing before fully dry
Hidden moisture can remain inside internal areas or closed cases.
Using excessive heat
Hair dryers, heaters, and direct sunlight can damage some products.
Pulling or stretching
Soft materials and openings should be handled gently.
Leaving cleaner residue
Complete the recommended rinse or wipe-down process.
Mixing materials in storage
Separate products unless direct contact is confirmed safe.
Using the wrong lubricant
Choose a formula approved for the product material.
Ignoring the manual
Generic advice cannot replace model-specific instructions.
FAQ UNLOCKED
Frequently Asked Questions
How often should I clean an intimate product?
Clean it before first use when instructed and after every use, following the product manual. A product that has been stored for a long time should also be inspected and cleaned as directed before use. Do not store it until all permitted areas are completely dry.
Can I turn a pocket pussy inside out?
Only if the product instructions explicitly say the sleeve is reversible. Turning a fixed or non-reversible sleeve inside out can stretch, tear, or separate the material. If the instructions are unclear, clean it without reversing it and contact support for model-specific guidance.
How long does an intimate product take to dry?
There is no universal drying time. Size, internal design, removable parts, room conditions, and material all matter. Inspect every permitted area rather than relying only on a timer. The product and its storage pouch should be completely dry before storage.
Can I clean it with ordinary soap?
Use ordinary soap only when the exact product instructions confirm that it is compatible. Fragrances, oils, moisturizers, and other additives can be unsuitable for some materials. A cleaner specifically approved for the product is the safer choice.
Can I use alcohol or household disinfectant?
Do not use alcohol, bleach, household disinfectant, or another strong chemical unless the manufacturer explicitly approves it for that product. These products can affect materials, coatings, adhesives, or finishes.
How should I store a TPE product?
Store it clean, dry, separate from unverified materials, and protected from sunlight, heat, pressure, dust, and staining fabrics. Follow the exact instructions for powdering, wrapping, and storage position because TPE formulations and product construction vary.
Can TPE and silicone products touch during storage?
Keep products in separate pouches or compartments unless their manufacturers confirm that prolonged contact is safe. Separating materials also reduces dye transfer, dust, cross-contamination, and accidental pressure damage.
Which lubricant should I use?
Use only a lubricant confirmed as compatible with the material and product. Check the product page and manual before purchasing. When in doubt, contact OVODOLL support with the exact model name rather than choosing by appearance alone.